ElectroFence® Gates
Product Details
48" ElectroFence Gates allow for quick access in or out of the paddock. Simply lift the handle, remove the post from the dock and go on through. For a shorter gate, look to 35" ElectroNet gates.
This a complete gate that can be added to the ends of existing nets (or between permanent fences) and electrified. Gate post locks in place via a handle and docking station. Stainless steel clips at each end of the gate provide electrical connections to netting. Gate's drivable posts can be used in hard soils.
Same mesh spacings as ElectroFence but with tighter verticals, 6" instead of 12".
Available as a 7.5 ft walk-through or a 21.5 ft for vehicles and whole flocks.
Instructions/Diagrams:
Common Uses
Specs
- 48" tall installed.
- 11 horizontals (10 conductive).
- Horizontals are white/black or green/black.
- Black/white gates have black posts and green/black gates have white posts.
- Horizontal spacings from bottom to top are: 4", 4", 4", 4", 4", 4", 6", 6", 6", 6".
- Verticals are white plastic struts placed every 6".
- 7.5 ft and 21.5 ft length options.
- Contains gate, posts, handle & docking station.
- Drivable posts are .75" PVC with a metal spike that goes into the ground.
- 21.5 ft gate contains a center post.
Benefits
Drivable posts—can be inserted into hard soils with a mallet or dead blow hammer.
Two more conductive strands than ElectroNet Gates—better for semi-permanent and perimeter fences, or for fences with high predator pressure.
Installation
If the gate is to be used in the middle of a fence line, and power needs to be carried across, simply use a PowerLink to carry the power over to the continuing section of fence.
Precautions
Warning! Due to risk of fire, do NOT use continuous output energizers with electric netting or electro-plastic conductors such as rope, twine or tape. Use only with a low or wide impedance intermittent pulse energizer. (Fi-Shock™ brand energizers which are sold as low impedance, continuous current output should NOT be used with electric netting.) All energizers sold on Premier’s website use an intermittent pulse and are suitable for use with electric netting.
Dry conditions and wintertime usage may reduce the effectiveness of electric netting. We do not recommend the use of electric netting during harsh winter conditions—ice and heavy snow can flatten netting and thereby damage it.
Dry or frozen ground may cause post spikes to bend or break if inserted with force. Pilot holes may be needed.
Troubleshooting
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Fencing
ElectroFence® Plus 11/48/12 Starter Kit
Item #207031 -Because of its heavy duty posts and spikes, ElectroFence maintains tension better over time than other nets—but it’s still easy to install and remove. 48" tall.
$831.00 -
Fence Connectors and Accessories
PowerLink™ 4.0, 30" long
Item #335500 -Make instant, in-field connections between electric fences without turning off the energizer. Simple to use and effective.
$5.50 -
Fence Connectors and Accessories
Fence & Battery Digital Tester
Item #200010 -All-in-one fence tester checks the voltage of energizers, fences and 12V batteries. Simplify electric fence troubleshooting with one device!
$38.00 -
Fence Connectors and Accessories
Warning Sign
Item #346000 -Let passersby know that your fences are electrified with this easy-to-read electric fence warning sign.
$2.50
-
Posts and Accessories
NetPost 19/48/DP, white
Item #205012 -19mm (0.60") diameter replacement PVC posts for Premier’s electric netting. Available in multiple heights, colors, and post spike options.
$4.40 -
Posts and Accessories
NetPost 19/48/DP, black
Item #205014 -19mm (0.60") diameter replacement PVC posts for Premier’s electric netting. Available in multiple heights, colors, and post spike options.
$4.40 -
Top
Dock (no stakes) for all Net Gates
Item #340618 -Replacement parts and components for Premier’s EasyGate, ElectroFence®, ElectroNet®, PoultryNet® gates.
$4.62 -
Top
Handle for ElectroFence, ElectroNet and PoultryNet Gates
Item #340631 -Replacement parts and components for Premier’s EasyGate, ElectroFence®, ElectroNet®, PoultryNet® gates.
$4.00 -
Top
Stake for Net Gate Dock, each
Item #340651 -Replacement parts and components for Premier’s EasyGate, ElectroFence®, ElectroNet®, PoultryNet® gates.
$2.00
Write a Review
You must be logged in to leave a review. Please sign in.
Ann C from California
This gate was a little spendy, but the convenience makes up for it. Works great!
Chris N from Washington
We purchased two to cover a 42 ft wide gravel driveway, which is unsuitable for fence spikes. We used 6" galvanized 3/8 nipples with caps and a hole drilled in one end for the fence spikes and buried them in the gravel driveway. The included metal pegs for the black plastic sockets managed to penetrate and hold. The gates are working well and keeping our dogs on the right side of the fence. We like the convenience of being able to open the gate without having to disconnect the PowerLink jumper wire.
The product is the usual high quality provided by Premier 1. We chose the green and black option with white posts, which blends well in our situation.
David M from Kentucky
I have one of these gates for my chickens, and it’s definitely something you will need.
Peter A from Maryland
Great product! I bought the “same” Premier 1 product years ago and it served its purpose but eventually wore out. The new version is a vast improvement. I was so impressed I bought 2 more, just to have on hand.
Chester C from New Hampshire
This gate works well, however in hard or rocky soil it can be hard to push the posts into the ground.
