Stay Holder
Product Details
The Strainrite Stay Holder helps prevent permanent fence H-braces from creeping during and after installation.
- Helps prevent horizontal supports from slipping or creeping
- Fits between post and brace as a secure shim
- Slides easily into position for fast installation
- Made from heavy-gauge galvanized steel
Helps maintain strong, reliable brace assemblies for long-term high-tensile fence performance.
Specs
- Dimensions: 6-3/4"L × 5"W
- Constructed from heavy-gauge galvanized steel
- Fits up to 3" horizontal cross braces
- Made in New Zealand by Strainrite Fencing Systems
For larger braces, upgrade to a Heavy Duty Stay Holder, featuring more robust construction for higher structural loads.
Tips
Brace installation basics:
- A good rule of thumb is to set 40–50% of the post below ground. More ground contact means greater strength and long-term stability.
- Strong braces resist lifting, twisting and movement under tension.
Common mistakes to avoid:
- Incorrect brace angles: If the angles formed by the horizontal brace, end post and brace wire are wrong, the end post can lift out of the ground. To fix this, lower the brace bar or use a longer cross bar. We prefer an 8 ft brace bar set about 36" above the soil, with the brace wire attached at the same height.
- Undersized or shallow end posts: For fences 3–4 ft tall, use end posts at least 8" in diameter and set them 4 ft deep to handle load and tension.
- Floating braces: Braces that aren’t firmly held in place will eventually fail. Fixed, properly aligned braces provide far greater strength.
- “Live” wires contacting brace wires: As posts move, electrified wires can touch brace wires and short out the fence. Correct brace alignment and solid post installation help prevent this issue.
Taking the time to install braces correctly pays off with stronger fences, fewer repairs and longer service life.
-
High-Tensile Wire and Accessories
Strainrite Heavy Duty Stay Holder
Item #408304 -Heavy-duty stay holder for H-brace and angled brace permanent fence assemblies. Holds brace rails in position for faster, more accurate installs.
$9.00 -
High-Tensile Wire and Accessories
Wire Twister, 3"
Item #408303 -High-tensile wire twister for splicing or terminating electric fence and vineyard wire. Produces uniform twists that hold tension better than hand-twisting or pliers.
$6.00 -
High-Tensile Wire and Accessories
High-Tensile Wire Cutter
Item #408305 -Professional-grade wire cutter tool for high-tensile fencing wire up to 8 gauge. Scalloped jaws, hardened edges, ergonomic grip.
$56.00 -
High-Tensile Wire and Accessories
XT1 Ratchet Strainer, each
Item #330200 -Permanent electric fence strainer for adding tension or splicing strands of high-tensile fencing wire. Made by Strainrite in New Zealand.
$4.50 -
High-Tensile Wire and Accessories
Gripple - Medium (10 to 14 gauge), each
Item #336800 -For splicing woven wire, smooth high-tensile (HT) steel wire and barbed wire.
$1.75 -
High-Tensile Wire and Accessories
RX2 Contractor Chain Strainer
Item #408309 -Tensions high-tensile electric fence wire for splicing. A proven design used by professional contractors for building livestock fences.
$140.00
Write a Review
You must be logged in to leave a review. Please sign in.
